Genuine New MW-E+H Proline Promass 80h Coriolis Flowmeter Factory Wholesale Price

Product Description

E+H Proline Promass 80H Coriolis Flowmeter

Product Description

E+H Proline Promass 80H Coriolis Flowmeter

 

Product Description:

The chemically resistant single-tube design of the Promass H provides highly accurate measurement of liquids and gases in applications requiring highest corrosion resistance. Combined with the proven Promass 80 transmitter with push buttons, Promass 80H offers a cost effective solution for these kind of applications.

 

Benefits

Modular device and operating concept resulting in a higher degree of efficiency
Data back-up for increased process quality
Multivariable flow measurement in compact design
Insensitivity to vibrations thanks to balanced single-tube measuring system
Efficient protection against forces from piping thanks to robust construction
Easy installation without the need for inlet and outlet runs

Field of application

The Coriolis measuring principle operates independently of physical fluid properties, such as viscosity and density.

Extremely accurate measurement of liquids such as oils, lubricants, liquefied gases, paints, cleaning agents and solvents
Fluid temperatures up to +200 °C (+392 °F)
Process pressures up to 40 bar (580 psi)
Mass flow measurement up to 70 t/h (2570 lb/min)
Approvals for hazardous area

ATEX, FM, CSA, TIIS
Connection to process control system

HART, PROFIBUS PA

 

Specification

Output signal	Current output Active/passive selectable, galvanically isolated, time constant selectable (0.05 to 100 s), full scale value selectable, temperature coefficient: typically 0.005% o.f.s./°C, resolution: 0.5 μA • Active: 0/4 to 20 mA, RL < 700 Ω (for HART: RL ≥ 250 <) • Passive: 4 to 20 mA; supply voltage US 18 to 30 V DC; Ri ≥ 150 Ω   Pulse/frequency output Passive, open collector, 30 V DC, 250 mA, galvanically isolated. • Frequency output: full scale frequency 2 to 1000 Hz (fmax = 1250 Hz), on/off ratio 1:1, pulse width max. 2 s • Pulse output: pulse value and pulse polarity selectable, pulse width configurable (0.5 to 2000 ms)   PROFIBUS PA interface • PROFIBUS PA in accordance with EN 50170 Volume 2, IEC 61158-2 (MBP), galvanically isolated • Profile Version 3.0 • Current consumption: 11 mA • Permitted supply voltage: 9 to 32 V • Bus connection with integrated reverse polarity protection • Error current FDE (Fault Disconnection Electronic): 0 mA • Data transmission rate: 31.25 kBit/s • Signal encoding: Manchester II • Function blocks: 4 x Analog Input, 2 x Totalizer • Output data: Mass flow, Volume flow, Density, Temperature, Totalizer • Input data: Positive zero return (ON/OFF), Zero point adjustment, Measuring mode, Totalizer control • Bus address can be configured via miniature switches or via the local display (optional)
Switching output	Status output (Promass 80) • Open collector • max. 30 V DC / 250 mA • galvanically isolated • Configurable for: error messages, Empty Pipe Detection (EPD), flow direction, limit values
Supply voltage	85 to 260 V AC, 45 to 65 Hz 20 to 55 V AC, 45 to 65 Hz 16 to 62 V DC
Power consumption	AC: <15 VA (including sensor) DC: <15 W (including sensor)   Switch-on current: • Max. 13.5 A (<50 ms) at 24 V DC • Max. 3 A (<5 ms) at 260 V AC
Power supply failure	Lasting min. 1 power cycle: • EEPROM saves measuring system data if the power supply fails. • HistoROM/S-DAT: exchangeable data storage chip with sensor specific data (nominal diameter, serial number, calibration factor, zero point, etc.).

Related Products

Certifications

Packaging & Shipping

FAQ

Q1. Are you a factory or a trading company?
A1. We are a trading company with a solid 10 years of international trading experience.
We've established partnerships with many factories and branded companies, and they strictly abide by our rules and regulations.
We integrate the entire advantageous industrial original and top quality sources, to meet your needs of different products.
Our long-term cooperations with factories ensure us to get a very low price with massive volumes, and provide you with the best price.
We can do almost everything the factory can do, and we are more professional and more trustworthy.

Q2. Trade terms?
A2. Mainly we do EXW, FOB, FCA, CFR, CIF, DDU, and other terms.

Q3. Payment terms and methods?
A3. Mainly TT advance and before delivery, sometimes irrevocable L/C at sight.

Q4. Value-added services?
A4. We could offer OEM & ODM services, logistics services, etc.

Q5. Price validity?
A5. Price validity will be mentioned on every PI according to different industry standard and conditions.

Q6. After sales-service?
A6. We normally respond within 24 Hours with whatever needs.

Q7. Samples?
A7. For small value standard items, free samples available, shipment cost to be borne by the customer.

Q8. Delivery time?
A8. If stocks, we could deliver out goods within 24~72 Hours; if no stocks, we will share you lead time on every PI for your reference and preparation.

Q9. Package?
A9. Air/sea worthy export standard.

Q10. Main markets?
A10. Overseas countries like Southeastern countries, European countries, American countries, domestic country China local.